Conversation Between BillBoost37 and GTPSHAWTY

13 Visitor Messages

Page 1 of 2 12 LastLast
  1. How do u disable security in pcm while tuning I know its disabled in pcm but the drop down menu is set to false and the number is set to 255
  2. Either adapters or wire them yourself by looking at the diagrams and getting the right connectors. Suspension wise.. the rack, subframe and strut mounts will all bolt right up. Those ar the only things I think you have to do.
  3. Im back and needing advice... Im dropping subframe from 05 gtp and swapping into a 03 mc ss n/a.... Would I run into issues with anything suspension wise... And how do I wire lq4 and n*....
  4. ok
    thanks sir
  5. Use the positive on the battery. YOu are looking for a short to ground.
  6. neg on battery.. touching every prong in side the clips
  7. Both on then turned off.. Still same result.. Nothing running thru em.. Even at the fuse block
  8. so i used a test light on all prongs to maf and evap.. none let nor showed any grounding.. but yet fuse still blows??
  9. blowing the ign1 uh fuse.. as soon as key turns on without starting the engine it pops... cods 101 and 1672 or something of the sorts are poping up.. which is maf and evap.. i unplugged both and stil pops the fuse...
  10. I dunno what the issue is..
Showing Visitor Messages 1 to 10 of 13
Page 1 of 2 12 LastLast