Thread: Feedback/Noise in speakers on Aftermarket Systems

Results 1 to 14 of 14
  1. #1 Feedback/Noise in speakers on Aftermarket Systems 
    Donating Users GeddyLee's Avatar
    Join Date
    Dec 2007
    Location
    St. Louis Mo.
    Posts
    2,573
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    35
    This was asked to be stickied cause it has helped a lot of people with grounding issues on their aftermarket headunits. The fix is quite simple. You take a 12ga wire and attach it to one screw at the back of the stereo and carefully wrap it around the RCA jacks at the rear of the HU. Of course you have to strip the wire and leave only a small bit at the one end of the wire. You will need two pieces of wire to complete this fix, but will make you a much happier camper with your new aftermarket car stereo.

    Here are the photos. Remember the RCA plugins to the RCA jacks will help secure the wire so they will not come out or move out of place. Now if you are having problems with with your aftermarket HU and you are not using AMPs with your new HU, you can still do this trick, but the only difference is that you will want to a ground wire from the back of the HU to a solid ground point under the dash.





    If you ever have any questions, please feel free to contact me here or via PM.

    Thanks!

    James Shafer
    2003 GP GTX SLP P/N 50066 (SOLD )
    2005 Nissan Pathfinder SE 4x4 (The baby hauler )
    St. Louis MO
    1.9 Modified Rockers, TOGs, 180 Tstat, PRJ 10.4 Wires, P/P Gen 3, SLP Ram Air Hood/Wizaired CAI, Gen 1 Spoiler, 3.4 ZZP Pulley, Desert Fox Tranny Cooler, Thrasher Shift Kit, 18" TSW Mondellos w/ AGX Struts, SSC Gen II Springs
    Reply With Quote  
     

  2. #2 Re: Feedback/Noise in speakers on Aftermarket Systems 
    GTP Level Member dstout's Avatar
    Join Date
    Mar 2009
    Location
    ky
    Posts
    761
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    Chats
    2
    Good Job Geddy....I think this will help people since it is a popular question.
    Reply With Quote  
     

  3. #3 Re: Feedback/Noise in speakers on Aftermarket Systems 
    Audio Moderator I800C0LLECT's Avatar
    Join Date
    Feb 2009
    Location
    Virginia
    Posts
    1,183
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    4010
    This is a good fix when ground loops are created by the RCA's between the Head Unit and connected devices(i.e. EQ's, amps, processors, etc). The difference of two grounds creates the noise.

    It also helps with blown pico fuses on Pioneers.
    Reply With Quote  
     

  4. #4 Re: Feedback/Noise in speakers on Aftermarket Systems 
    SE Level Member eddie97gt's Avatar
    Join Date
    Feb 2009
    Location
    roanoke va
    Posts
    116
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    pioneer deck in mine and 3 amps 1 per front door and a sub amp , no noise here , i did a d block in the back with 4 ga about a foot long and grounded under the seat but the factory ground in the deck harness has worked fine for me . You might also want to look at the ground at the battery under the boot , usually corosion will build up under the gm terminal and you never see it like you would with a top post .
    Reply With Quote  
     

  5. #5 Re: Feedback/Noise in speakers on Aftermarket Systems 
    SE Level Member
    Join Date
    May 2008
    Posts
    55
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    Install a ground loop isolator.

    Ground Loop Isolators
    Reply With Quote  
     

  6. #6 Re: Feedback/Noise in speakers on Aftermarket Systems 
    SE Level Member mriley's Avatar
    Join Date
    Jun 2010
    Location
    enfield ct
    Posts
    21
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    nice solution to a popular problem good job
    Reply With Quote  
     

  7. #7 Re: Feedback/Noise in speakers on Aftermarket Systems 
    Awaiting Confirmation
    Join Date
    Jul 2009
    Location
    aowdnawi
    Posts
    23,292
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    Chats
    64942
    actually its a ghetto solution to a retarded problem that shouldnt exist..........
    Reply With Quote  
     

  8. #8 Re: Feedback/Noise in speakers on Aftermarket Systems 
    Audio Moderator I800C0LLECT's Avatar
    Join Date
    Feb 2009
    Location
    Virginia
    Posts
    1,183
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    4010
    Quote Originally Posted by matt5112 View Post
    actually its a ghetto solution to a retarded problem that shouldnt exist..........
    It's a solution for when treating your equipment inappropriately. i.e. plugging/unplugging RCA's while all the hardware is ON. That blows the PICO fuse. This really shouldn't exist.
    11 is louder than 10!
    Audio Build Logs: DIYMA and GPONA
    Reply With Quote  
     

  9. #9 Re: Feedback/Noise in speakers on Aftermarket Systems 
    GT Level Member chamilton89's Avatar
    Join Date
    Apr 2010
    Location
    Columbus, Ohio, United States
    Posts
    358
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    20
    Honestly, I had the same problem with my head, blew the internal pico fuse for the HU itself. This solution is a little silly honestly, there is no need to ground every single separate RCA since they are all connected to the same internal grounding point. There all connected, so ground one and you've grounded them all. Much easier and it looks better than that figure 8 crap we got goin on!
    Reply With Quote  
     

  10. #10 Re: Feedback/Noise in speakers on Aftermarket Systems 
    GT Level Member douger's Avatar
    Join Date
    Aug 2012
    Location
    Fort Wayne
    Posts
    162
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    Quote Originally Posted by matt5112 View Post
    actually its a ghetto solution to a retarded problem that shouldnt exist..........

    I think I agree.

    The shields on the RCA plugs in your head unit should be grounded inside the head unit itself. If you don't think that the ground you used hooking the unit up to the OEM harness isn't enough, then run a dedicated ground from the head unit case to the chassis...if you're really anal, run it to the battery negative terminal.

    12 gauge wire is overkill...18 gauge will do ya. I'm talking about your average 50 watt per channel head unit. If you're talking about a head throbbing amp, Ohm's law and a wiring capacity chart...both readily available on the 'net...is your friend.

    Ground loop isolators should be able to clean up minor alternator whine and some ignition popping. If it doesn't then you'll need to go to the source. Alternator whine is most likely failing or dead diodes in the alternator. Ignition pop can be traced back to the wires or the plugs.
    Reply With Quote  
     

  11. #11 Re: Feedback/Noise in speakers on Aftermarket Systems 
    GrandPrix Junkie PurpleGuy's Avatar
    Join Date
    Aug 2010
    Location
    Never Never Land
    Posts
    4,864
    Thanks (Received)
    1
    Likes (Received)
    10
    Dislikes (Received)
    1
    Chats
    11961
    +1 for this ghetto solution. Took damn near all the static out
    2001 Regal GS, PLOG, 3" DP, 1.9's/L76 springs. 21* of timing on a 3.4"
    Reply With Quote  
     

  12. #12 Re: Feedback/Noise in speakers on Aftermarket Systems 
    Donating Users jacobmh27's Avatar
    Join Date
    Mar 2008
    Location
    Naugatuck CT
    Posts
    440
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    did the same thing to my Pioneer fized the problem
    http://www.cardomain.com/ride/3059486
    2001 GTP, TransGo shift kit, SSAC Headers, AeroForce Scan, TDC Racing FWI, Overkill PCM, 3.4 Pully,MSD Coil Packs, Moroso Wires, AL104's, 160Tstat
    Reply With Quote  
     

  13. #13 Re: Feedback/Noise in speakers on Aftermarket Systems 
    SE Level Member
    Join Date
    Sep 2013
    Location
    Boise, ID
    Posts
    13
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    56
    How common of an issue is this nowadays? What are the chances of this happening in my '00 GTP?
    Reply With Quote  
     

  14. #14 Re: Feedback/Noise in speakers on Aftermarket Systems 
    SE Level Member
    Join Date
    Aug 2011
    Location
    Galveston
    Posts
    27
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    1
    Quick simple job man good info
    Car Clean!!!! Keep Calm and Cruise
    Reply With Quote  
     

Similar Threads

  1. Mods I'm considering (Feedback Please)
    By bct717 in forum Visual/Body Modifications
    Replies: 11
    Last Post: 05-14-2009, 06:03 PM
  2. Aftermarket door speakers?
    By RMayer in forum Audio, Security & Visual Electronics
    Replies: 11
    Last Post: 02-05-2009, 05:30 PM
  3. Aftermarket Door speakers
    By offroadfury6 in forum Audio, Security & Visual Electronics
    Replies: 4
    Last Post: 08-31-2008, 02:55 PM
  4. show your systems
    By Grandprixboy1224 in forum Audio, Security & Visual Electronics
    Replies: 3
    Last Post: 04-01-2008, 11:00 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •