Anyone ever get this code? It started showing up after I dropped to a 3.0 and I noticed my ltft'a are always negative.
Sent from my iPhone using Tapatalk
|
|
05-02-2013
Anyone ever get this code? It started showing up after I dropped to a 3.0 and I noticed my ltft'a are always negative.
Sent from my iPhone using Tapatalk
05-02-2013
Looks slightly familiar.. is that the "Please tell us what code it is" code?
05-02-2013
Since I'm a sarcastic jerk, I also looked it up.
P1260 OBD Trouble Code
1 result found
Type Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled Description Fuel Pump Speed Relay Control Circuit Conditions Cause Key on or engine running, then the PCM detected an improper voltage level on the Fuel Pump Speed Control PWM circuit, condition met for at least 30 seconds
With that info, do you know any reason why the pcm is detecting soemthing with the fuel pump. Maybe you put a hotwire kit in place?
05-02-2013
That's why I always go with the Travelocity kit instead...Originally Posted by BillBoost37
Sorry...couldn't help it...I'm leaving now...
05-02-2013
lol Bill, the sarcasm is always welcome!
Nope, no kit... this code just started happening when dropped to a 3.0 pulley.
Maybe it's just coincidental?
Last edited by L67PWR; 05-03-2013 at 12:36 PM.
05-02-2013
I've never heard of a fuel pump electrical issue code being linked to a round pulley. No.. I don't believe they are linked. Although if you changed the pulley, you dicked around with the fuse box. That code is likely from an issue with the box.
05-03-2013
Checked every last fuse, wire, connector etc...
Started to re-tune my LTFT's this morning. So far the code is gone and hasn't come back(so far).
I wonder if the issue is from having constant negative ltft's....
Tricky stuff
05-06-2013
Bill, I have been testing and scanning left and right to no avail. The code only shows up on WOT runs... Perhaps my Fuel pump can't keep up? Or maybe I should do the Hotwire/Travelocity lol... any other ideas?
05-06-2013
I'm thinking you need to research that code further. Find some GM info on it to understand why what you are suggesting is not even in left field..it's in another whole ball field, in a different state from your code.
See what it says will cause the code and then you can test/diagnose properly.
05-06-2013
Further research, I found a QC GP post about it, saying it's not technically a code for an 02.. but I'd want to check my GM FSM's first.
05-06-2013
Guess I'll keep at it. Thanks for the info
05-06-2013
I might have a spare minute tonight. Post your vin please.
05-06-2013
Maybe even Orbitz...
05-06-2013
Vin: 1G2WR1219YF326906
Thanks for any help.
05-11-2013
Solved: Gt body is always high speed. Just had to turn off the error code.
01-06-2020
So the gt fuel pump is always in run high mode
01-07-2020
Almost all cars were high-only. The FP speed control relay/resistor was a commonly deleted or bypassed system on 3800 SC cars to eliminate the possibility of failure.
Total guess, but with a SC tune and LTFT's wanting to reduce fuel, it could've been trying to enter low-speed mode and erroring due to the hardware not being there. Never looked into how detailed they programmed that system, so apply much salt to my guessing on that. Probably something in that realm of the pcm thinking it should be seeing that FP resistor and speed relay, though. Kill the DTC in the tune, and party on, if you don't have a car that came with that stuff.
01-08-2020
So would this code cause my car to idle at around 1500 rpms
01-08-2020
Error Code P1260: Theft Detected Vehicle Immobilized makes it not run, so it cant be stolen.
01-09-2020
Tim from zzp said he never heard of this code one site says its theft detected and a gm DTC codes list says its fuel pump speed wiring either way I'm doing the zzp website procedure and installing pcm security relearn and case learn
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
